Chassis Mounting
I have a dryer that is located under a bathtub. At present it only has a 3 lead pigtail to the receptacle?
which is grounded.....4 wires to it, but only a 3 pronged receptacle, so the ground wire is just bonded to the mount plate of the receptacle. If the chassis of this dryer (or oven) which is in same condition of wiring as the dryer...if that chassis becomes energized from a malfuntion, will the 30 Amp non GFCI breaker trip before someone is hurt seriously?
if your dryer is next to the washer run a wire from a screw on the back to the cold water pipe and clamp the wire to it. you can buy a clamp for just that purpose at any hardware store for about $1.00. make the wire a few feet longer than you need so that you can move the dryer out to install it. good luck and happy holidays!
Check out these Chassis Mounting-related listings and save big bucks!
 4 Pack Brake Line Fitting Chassis Tab Mounting IMCA US $7.35 
|
 4 Pack Hood Pin Kit Chassis Mounting Tab 1/2" IMCA Mod US $7.50
|
 IMCA UPPER A - ARM MOUNT CHASSIS MODIFIED UMP NEW US $12.24
|
 40 Pack Hood Pin Boss Threaded Chassis Mount 1/2"-20 IMCA UMP US $71.95
|
 40 Pack Brake Line Fitting Chassis Tab Mounting IMCA US $45.95
|
 40 Pack Hood Pin Kit Chassis Mounting Tab 1/2" IMCA US $45.95
|
 Slotted Chassis Mount Bracket NEW US $5.75
|
 ALLSTAR - ALL38082 - Motor Mount Kit, GM Metric Chassis US $52.99
|
 NEW COLEMAN CHASSIS TRAILING ARM MOUNT BRACKETS 15796 RACING US $10.45
|
 Brake Line Fitting Chassis Tab Mounting IMCA Modified US $1.40
|
 Hood Pin Kit Chassis Mounting Tab 1/2" IMCA Modified US $1.95
|
 10 Pack Body Mount Chassis Tab 7/16" Mounting Hole IMCA US $14.95
|
 50 Pack Body Mount Chassis Tab 7/16" Mounting Hole IMCA US $48.95
|
 10 Pack Body Mount Chassis Tab 1/4" Mounting Hole IMCA US $14.95
|
 50 Pack Body Mount Chassis Tab 1/4" Mounting Hole IMCA US $48.95
|
 New Eagle Aluminum Rear Mount Motor Plate US $239.99
|
 UNIVERSAL WELD ON AXLE CHASSIS FRAME SHOCK MOUNT NARROW US $7.95
|
 UNIVERSAL WELD ON STEEL AXLE CHASSIS SHOCK MOUNT 2 INCH US $11.95
|
 10 Pack Hood Pin Boss Threaded Chassis Mount 1/2"-20 IMCA UMP US $25.95
|
 10 Pack Brake Line Fitting Chassis Tab Mounting IMCA US $13.85
|
 10 Pack Hood Pin Kit Chassis Mounting Tab 1/2" IMCA US $13.95
|
How to mount inline chassis frame to ice hockey boots, sprung on ccm
Recently found via this site: