Steel Braid
Do not overpay for Steel Braid items!
Check out these Steel Braid-related listings from eBay and save big bucks!
 25" STAINLESS STEEL BRAIDED LINE HOSE AN 3 BRAKE FUEL US $11.55 
|
 NASCAR 14 Stainless steel braided brake lines AN-4 US $99.99
|
 NASCAR 2 Aeroquip Stainless steel braided hoses AN-10 US $39.99
|
 Stainless Steel Braided Fuel Hose 1.5m AN 10 AN10 US $29.99
|
 Stainless Steel Braided PTFE Teflon Hose 1m AN -3 AN3 US $9.90
|
 Stainless Steel Braided PTFE Teflon Hose 1m AN -4 AN4 US $9.90
|
 NASCAR 8 Stainless steel braided brake lines AN-4 US $49.99
|
 NASCAR 4 Stainless steel braided brake lines AN-4 US $34.99
|
 GM Powerglide, Braided Stainless Steel Dipstick, New US $29.99
|
 3AN Braided steel Oil Fuel Teflon Hose / Line 20" US $9.99
|
 3AN Braided steel Oil Fuel Teflon Hose / Line 24" US $9.99
|
 3AN Braided steel Oil Fuel Teflon Hose / Line 22" US $9.99
|
 3AN Braided steel Oil Fuel Teflon Hose / Line 26" US $9.99
|
 Agency Power Subaru WRX / STi Steel Braided Clutch Line US $40.00
|
 ls vtec steel braided line w/ t fitting and knock sensor US $30.00
|
 Stainless Steel Braided Fuel Hose 6m AN 12 AN12 Fitting US $94.00
|
 NASCAR 3 Stainless steel braided hoses AN-10 US $34.99
|
 Stainless Steel Braided Fuel Hose 3m AN 12 AN12 Fitting US $64.00
|
 -6 Steel Braided Hose With Fittings US $9.99
|
 Stauff 3/4-inch Clamp - Holds AN -8 Braided Steel Hose - NASCAR NHRA SCCA ARCA US $8.99
|
 -6 AN Braided Stainless Steel Fuel Line Hose 1 FT US $5.40
|
 USED RACING STAINLESS STEEL BRAIDED LINE -20AN 25" 90-DEG/STRAIGHT FITTINGS A US $45.00
|
Steel braided brake lines, 2000 Civic Ex, rear break swap, CRX help?
Hi, I have a 90 CRX HF with a rear disc conversion from a 2000 Civic Ex... well I was wondering if the rear steel braided brake lines would fit the EX caliper, I have to get the CRX ones because of the exact length.. but would I have to modify the connection to the rear caliper, or is it pretty much the same outlet/inlet for the brake line??
please dont tell me to go to honda tech...
haha zack, it all makes sense!!
All the brake line fittings on any honda/acura are going to be the same. For example, your EF CRX, mated with the EK Civic rear brakes are going to use the same fittings.
The length of the hose shouldn't matter any either. They should all be generally the same length and no mechanical reason to shorten and or lengthen.
The car's do NOT come with stainless steel lines normally, so that has to be aftermarket. As long as it was purchased for the correct application. It should all be generally straight forward... Remove, and Replace.
Stately Steel Braided Leather High-Polish Bracelet
Recently listed via this site: